Hot Peel Pressing Instructions

1. Heat Press Settings

• Cotton & Blends: 315°F for 15 seconds
• Polyester: 300°F for 10 seconds
• 100% Thick Cotton: 315 for 20 seconds.
• Pressure: 60 PSI

2. Pre-Press Material

Always pre-press your garment to remove moisture. Use the same time and temperature settings as your main press.

3. Place Transfer & Press

Align your transfer on the garment and cover it with a Teflon sheet or parchment paper before pressing.

4. Hot Peel Transfer

After pressing, wait 3–5 seconds, then grab a corner and peel the film away in one quick, smooth motion.

5. Finishing Press

Place a Teflon sheet, film, or parchment paper over the design and press again.
This step ensures the transfer is fully embedded into the fabric for a softer, longer-lasting finish.

These instructions may vary depending on the material you are pressing. Always do a test first. Adjust as needed.