11 Inch Custom DTF Transfer

The customer must provide the design file ready to print!

• The design file MUST be in PNG format with transparent background. We do offer a background removal found  HERE.
• The resolution should be 300 DPI (Dots per inch).
• Designs will be sized based on your size selection and the longest side of the design. 
• Designs need to be with a transparent background. How you send your file is how your design will be printed. Refunds will NOT be given.
• This is for a SINGLE IMAGE only, if you need more than one image please use our gang sheets found HERE.
• We will NOT make edits to your design. If you need design work or editing please contact us prior to purchase and there will be a $20 design fee.
• If you have any questions on this please email us prior to ordering at info@GriffinExpressions.com. 

Suggested Pressing Info

• Temperature: 315°F
• Time: 15 seconds
• Pressure: Medium/Heavy

Pressing Instructions

1. Pre-press the fabric for 15 seconds to remove any moisture.
2. Place the DTF Transfer on the fabric, cover with a Teflon sheet, and press for 15 seconds.
3. While still hot, peel the transfer after 5 seconds. HOT PEEL
4. Cover with a Teflon sheet, and press again for 15 seconds.
5. Done!

These instructions may vary depending on the material you are pressing. Always do a test first and adjust as needed.

• 100% Polyester: 300°F for 10 seconds
• 100% Thick Cotton: 315°F for 20 seconds

Custom designs become property of Griffin Expressions and can be sold  unless otherwise agreed upon prior to purchase.

⚠️ All sales are FINAL. No refunds will be given. If there is an issue with the print, please email us at info@GriffinExpressions.com.

Licensing Information
Griffin Expressions is not liable for any copyright or infringement issues that may arise from improper or illegal use of any file(s) purchased from Griffin Expressions.